什么是车道辅助？
首先，让我们了解车道辅助的用途。它有助于防止因意外偏离车道而导致的事故，并提高驾驶安全性。当系统检测到车辆会无意中偏离车道时，它不仅会在视觉上警告驾驶员，还会暂时接管方向盘并轻轻地将车辆转向当前车道。
首先，对您的汽车进行完整备份，此编码与在MQB平台上生产的汽车兼容。示例：帕萨特 B8、高尔夫 7、明锐 A7、莱昂 5F、奥迪 A3 8V…
Activate Lane AssistLet’s codeRequired: A tablet or phone with OBDEleven installed. Or a PC with VCDS installed.Control module “A5 Front Sensor” in your car.1- Select Control Module “17 – Instruments” and go to “Long Coding”o        Byte 4 – Bit 6o        Byte 11 – Bit 1 and Do It!2- Select Control Module “A5 – Front Sensor” and go to “Long Coding”o        Byte 16 – Bit 7 and Do It! But don’t exit the control module. We’re not done here yet.3- Go to Security Acces: “20103”. Then go to Adaptation and make these changes        HCA_On_State = “Menu”o        HCA_Warning_Intensity = “Menu”o        BAP Personalization = “Not Activated”o        Point_of_Intervention(if available) = “Late”4- Go to Control Module “44 – Steering Assist” – Enter security access: “19249”o        Long Coding – Byte 0 Bit 4 and Do It!5-Go to Control Module “5F -Information Electr” – Adaptationo        Car_Function_Adaptations_Gen2>menu_display_Lane_De parture_Warning = Set Value to “Activated”o        Car_Function_Adaptations_Gen2>menu_display_Lane_De parture_Warning_over_threshold_high = Set Value to “Activated”o        Car_Function_List_BAP_Gen2>LDW_HCA_0x19> Set Value to “Activated”o        Car_Function_List_BAP_Gen2-LDW_HCA_0x19_msg_bus> Set Value to “Terminal 15”