ODIS 5.2.6混淆数据库-汽车软件论坛-改装板块-我爱车改

ODIS 5.2.6混淆数据库

ODIS 5.2.6混淆数据库


Hello collaborators, I’m having trouble starting or diagnosing with
fault-driven localization in ODIS 5.2.6 postsetup 98.0.210.

PROBLEM

The problem is that it does not automatically recognize the vehicles: FOX, GOL, SAVEIRO and VOYAGE, although the identification is done manually, a list of models does not include the models used 5U and 9B. But in ODIS Engenharia 11 and ODIS 5.1.6 everything works perfectly.

TEST

Starting the diagnosis

See what the chassis is automatically identified:

图片[1]-ODIS 5.2.6混淆数据库-汽车软件论坛-改装板块-我爱车改

But when starting the diagnosis * the following happens:

* the ignition is on! The software does not recognize the ignition status of FOX, GOL, SAVEIRO and VOYAGE vehicles.

图片[2]-ODIS 5.2.6混淆数据库-汽车软件论坛-改装板块-我爱车改

Even forcing the identification manually *:

* Type 5U and 9B vehicles are not included in the model list.

图片[3]-ODIS 5.2.6混淆数据库-汽车软件论坛-改装板块-我爱车改

图片[4]-ODIS 5.2.6混淆数据库-汽车软件论坛-改装板块-我爱车改

图片[5]-ODIS 5.2.6混淆数据库-汽车软件论坛-改装板块-我爱车改

We will continue with an option ‘Remaining passenger vehicles‘:

图片[6]-ODIS 5.2.6混淆数据库-汽车软件论坛-改装板块-我爱车改

The location begins to suspect:

图片[7]-ODIS 5.2.6混淆数据库-汽车软件论坛-改装板块-我爱车改

When finalizing the location, only the engine electronics is available:

图片[8]-ODIS 5.2.6混淆数据库-汽车软件论坛-改装板块-我爱车改

The rest (panel, immobilizer, BCM) is unavailable:

However, ODIS Engenharia 11 and ODIS 5.1.6 * recognize everything normally:

* Installed on the same computer, tested and working.

图片[9]-ODIS 5.2.6混淆数据库-汽车软件论坛-改装板块-我爱车改

Suggestion

Some way to edit the DIDB, configure ODIS, include projects (ODX, MDX).

I’m going to update photos and solutions here, because I need help and I’m working on it.

Thank you all!

评论 抢沙发

请登录后发表评论

    请登录后查看评论内容