MQBevo – 车道保持辅助/车道偏离警告/打开和关闭后驻车制动器/禁用登录屏幕
1-车道保持辅助/车道偏离警告
MQBevo – Lane Keeping Assist/Lane Departure Warning
Adjust power-on state
STGA5 – Apron camera > coding >
Byte 9 > Bit 0-1 03 Configuration_for_lane_departure_warning_Kl15  Last_setting
Activate Adaptive Lane GuidanceNot possible with Travel Assist ex works!
STGA5 – Apron camera > coding >Byte 8 > bit 5-7 > 80.Point_of_intervention.early_setting_over_menu

2-打开后驻车制动器Opening the rear parking brake
  
Conditions:
connect a suitable battery charger
Parking brake released
STG03 – Brake electronics > SFD activation >
Basic setting – 04 Start pad change mode Select
The brake calipers now retract so that the brake can be serviced.
The process is complete when the sounds of the pistons are no longer audible.
Press Stop to end the process.
You can now turn off the ignition, but you should leave the charger plugged in.

关闭后驻车制动器
Closing the rear parking brake
STG03 – Brake electronics > SFD activation >
Basic setting – 04 Select Exit pad change modeThe brake calipers now open and close several times. The process is complete when the sounds of the pistons are no longer audible.
Press Stop to end the process.
The process is now complete

3-MIB 禁用登录屏幕
Disable login screen
The encoding prevents the login screen (loading settings…) from being disabled. This coding ensures that infotainment is faster to reach.  
STG5F – Information Electronics > Customization
IDE04307-ENG248711 vehicle Function list BAP IAA_PSO_0x52 > not activated
ENG248435-ENG251555 function_configuration_pso iaa_function > not enabled
ENG248435-ENG297696 function_configuration_pso iaa_function > not enabled